Print Live Data; Numeric Format - GE DigitalFlow DF868 Programming Manual

Print Live Data

Numeric Format

Printing Data
DATA
Use the submenu to print live measurement data as it is
collected. The data may be printed in either numeric or graphical
format, with a user specified time increment.
IMPORTANT:
Make sure that a printer has been properly set up
before proceeding with this section.
To print live measurement data, refer to Figure A-7 on page A-7, and
complete the following steps:
1. To access the Print Menu, press the
Note: The Print Menu is not protected by the security feature and a
password is never required to access this menu.
[F1] DATA
2. Press = .
[F1]
3. Press to print the data in numeric format or press
the data in graphical format.
•
[F1],
If you press go to step 4.
• [F2],
If you press go to step 8.
4. Use the [←], [→] and
be printed. See Table 4-2 below for a list of the available options.
Table 4-2: Measurement Parameter Options
Option Bar Choice
=
[F1] VEL
=
[F2] VOLUM
=
[F3] +TOTL
=
[F4] -TOTL
→]
=
[ + [F1] MDOT*
→]
=
[ + [F2] +MASS*
→]
=
[ + [F3] -MASS*
→]
=
[ + [F4] POWER**
→] →]
=
[ + [ + [F1] +ENRG**
→] →]
=
[ + [ + [F2] -ENRG**
→] →]
=
[ + [ + [F3]
* Available only if "Mass Flow (static)?" = YES
**Available only if "Energy Option" = YES
[PRNT]
key.
[F1]-[F4]
keys to select the first parameter to
Description
Flow Velocity
Volumetric Flow
Forward Totalized Volume Flow
Reverse Totalized Volume Flow
Mass Flow
Forward Totalized Mass Flow
Reverse Totalized Mass Flow
Energy Flow Power
Forward Energy Flow
Reverse Energy Flow
Diagnostic
DIAG
March 2008
[F2]
to print
4-3