Graphical Format - GE DigitalFlow DF868 Programming Manual

Graphical Format

Printing Data
To print live data in graphical format, continue as follows:
8. Use the [←], [→] and
be printed. See Table 4-2 on page 4-3 for a list of the available
options.
9. Enter the desired maximum value for the Y (vertical) axis and
[ENT]
press .
Note: Enter a
Y AXIS MAX
expected measurement value.
[F1]
10.Press to show only the positive Y axis or press
both the positive and negative y axis.
11. Use the [←], [→] and
Increment (the frequency at which measurements are taken). The
available options at this prompt are: 5sec, 10sec, 30sec, 1min,
3min, 6min and 12min.
After the time increment is chosen, the Model DF868 returns to the
standard data display screen and continues to take measurements. The
live data is printed at the specified time intervals, until a
command is issued (see the instructions for the
page 4-9). A portion of a typical printout is shown in Figure 4-2
below.
CHANNEL NAME
1.0
.9
.8
.7
.6
.5
.4
.3
.2
.1
0.0
START TIME
03:27:01 PM
20 OCT 97
Figure 4-2: A Typical Graphical Printout
[F1]-[F4]
keys to select the first parameter to
value that is larger than the largest
[F1]-[F4]
keys to select the desired Time
STOP
CHANNEL MESSAGE
X-AXIS 50 seconds PER-DIV
Y-AXIS MAX 500 ACF/M
March 2008
[F2]
to display
STOP
submenu on
1.0
.9
.8
.7
.6
.5
.4
.3
.2
.1
0.0
END TIME
03:28:46 PM
20 OCT 97
4-5