GE DigitalFlow DF868 Programming Manual page 52

March 2008
Energy Option Prompts
1-44
[F1]-[F4]
1. Press to select the desired Units for measuring power.
The abbreviations and definitions of all the available power units are
shown in Table 1-17 below. The choices shown on the option bar in
the prompt screen above are determined by the selections made at the
previous System Units prompt screen.
Table 1-17: Power Unit Options
English Power Units
kBTU—Thousands of British
Thermal Units per Hour
MMBTU—Millions of British
Thermal Units per Hour
kW—kilowatts
Tons
[F1]-[F4]
2. Press to select the desired number of Decimal Digits
(digits to the right of the decimal point) in the power display.
[F1]-[F4]
3. Press to select the desired Units for measuring total
energy.
The abbreviations and definitions of all the available total energy
units are shown in Table 1-18 below. The choices shown on the
option bar in the prompt screen above are determined by the
selections made at the previous System Units prompt screen.
Table 1-18: Energy Unit Options
English Energy Units
kBTU—Thousands of British
Thermal Units
MMBTU—Millions of British
Thermal Units
kWHr—Kilowatt-Hours
Tons
[F1]-[F4]
4. Press to select the desired number of Decimal Digits
(digits to the right of the decimal point) in the total energy display.
When the above selection has been made, the meter will exit the
SYSTM
submenu and return to the initial
Metric Power Units
kCAL/sec—Kilocalories/second
MCAL/sec—MegaCalories/
second
kW—kilowatts
MW—Megawatts
Metric Energy Units
kCAL—Kilocalories
MCAL—MegaCalories
kW—Kilowatt-Hour
MW—Megawatt-Hour
Global PROGRAM
screen.
Programming Site Data