Emax E4.2 Circuit-Breakers; Contents; Overview; Integrated Informations - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions

Emax E4.2 circuit-breakers

1 - Contents

Overview This manual contains instructions on the operations to be performed on Emax E4.2 circuit-breakers
Integrated informations The full description of the Emax 2 family is available in document
recipients This manual refers to two user profiles, as defined by standard IEC 60050:
Specifications and supporting
documents
Design notes The information in this manual was written in Italian and then translated into other languages to conform to
5 | © 2021 ABB | 1SDH002083A1002 - ECN000119014 - Rev. A
throughout their life cycle, from reception to installation, and from commissioning to subsequent maintenance
during operation, with particular attention to the environment at the end of the life cycle of the product.
Reception Installation
Figure 1
manual) available on the website ABB library.
• Electrically Skilled Person (IEV 195-04-01): person with relevant education and experience to enable him
or her to perceive risks and to avoid hazards which electricity can create.
• Trained Persons in the electrical field (IEV 195-04-02): person adequately advised or supervised by electrically
skilled persons to enable him or her to perceive risks and to avoid danger which electricity can create.
IMPORTANT: This manual specifically indicates what operations can be performed
by people trained in the field of electricity. All the remaining operations described in
the handbook must be performed by skilled persons, in the electrical field. ABB
declines all liability for damage to persons or property caused by failure to comply
with the instructions in this document.
To ensure that the Emax 2 circuit-breaker is installed and configured correctly, please read the information in
this manual and in the technical documentation of the product, supplied with the circuit-breaker or available
in the website ABB
liBRARy
Document
1SDC200023D0906
1SDM000017A1001
1SDC200013D0201
the laws and/or commercial requirements concerning the product.
Commissioning
Description
Sace Emax 2 CBs General catalog
Circuit diagrams of disconnectors Sace Emax 2 MS/DC-E
Technical catalog "SACE Emax 2 MS/DC-E"
ABB | SACE Emax 2
Maintenance Disposal
1SDH001330R1002 (Emax 2 engineering
Emax E4.2 circuit-breakers | 1 - Contents