Storage Method - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions

Storage method Place the packaging (circuit-breakers and / or fixed parts) on a horizontal plane, not in contact with the floor.
10 | © 2021 ABB | 1SDH002083A1002 - ECN000119014 - Rev. A
If the circuit-breaker has been removed and reinserted in the package ensure, prior to storage that:
• The circuit-breaker is in the open position and the springs are discharged. See the chapter "Description
- circuit-breaker opening/closing operations" on page 18
• The circuit-breaker is protected and locked in its original packaging
WARNING! stack up to three packages of E4.2 circuit-breakers. If the package has
been opened, stacking is allowed as long as the package is re-wrapped as it was
originally.
Figure 4
WARNING! If the package with the terminals is joined to that of the circuit-breaker
(UL 2500A-3200A) additional packages cannot be stacked on top.
OK!
Figure 6
Figure 5
NO!
Management operations | 1 - Transport and checking on receipt
ABB | SACE Emax 2
OK!
NO!
≤3