Toro STX-26 Operator's Manual page 11

•
To turn right, rotate the traction control clockwise
(Figure 10).
Figure 10
•
To turn left, rotate the traction control
counterclockwise (Figure
•
To stop the machine, release the traction control
(Figure 7).
Note:
The farther you move the traction control in
any direction, the faster the machine moves in that
direction.
11).
Figure 11
Grinder Control/Hydraulic-Lift
Lever
Operate the grinder using the grinder control lever
as follows:
•
To start the grinder
trigger and then press the red button on the top of
the lever. Once the grinder has started, you can
release the red button.
•
To stop the grinder
g008131
for more than a half second.
Note:
If you are operating the grinder and
momentarily release the trigger (i.e., less than a
half second), the grinder continues to operate.
g008132
1. Neutral
2. Start the grinder
11
(Figure 12), squeeze the
(Figure 12), release the trigger
Figure 12
3. Run the grinder
4. Stop the grinder
g013174