Toro Pro Force Groundsmaster 3200 Series Operator's Manual page 7

1. Jack stand
2. Pin
8. Remove the strap from the pallet and attach it to
the lift loop on the blower
9. Lift the blower until the strap is tight.
1. Lift loop
10. Insert the jack-stand tube into the frame tube,
align the holes, and secure it into position with
the snapper pin (Figure
Figure 6
3. Jack-stand tube
4. Snapper pin
(Figure 7).
Figure 7
8).
1. Frame tube
2. Snapper pin
11. Remove the cable tie securing the crank handle
to the jack crank.
12. Crank the jack stand down until the jack pad is
g363311
level with the castor wheel tires.
13. Carefully remove the bolts holding the blower
to the wood pallet.
14. Slide the crate away from the blower and lower
the blower until the castor wheels and jack stand
touch the floor keeping the strap tight
g021675
1. Bolts
15. Remove the strap from the blower lift loop.
7
Figure 8
3. Jack stand
(Figure
Figure 9
g362315
9).
g362311