NEC Express5800 Series Maintenance Manual page 54

Chapter 1 Maintenance
[?] On Windows OS, there is a Virtual Install Disk (a Drive called VID).

By following the steps below, you can disable the Virtual Install Disk.
1. Press the F10 key during POST to start the EXPRESSBUILDER.
2. After restarting from EXPRESSBUILDER, click [Perform Maintenance].
3. Click [BIOS/Platform Configuration].
4. Go to [BIOS/Platform Configuration (RBSU)] - [System Options] - [USB Options] - [Virtual Install
Disk] and set to Disabled.
5. Click the [BIOS/Platform Configuration (RBSU)] on the left pane and click [Update].
6. After restarting, VID will be disabled.
With this, the procedure is completed.
[?] Setting the organization name and owner name in the system

Edit the following registry. Edit the registry with extreme care.
1. Sign in to Windows that has been installed to this unit with the account for the Administrator right.
2. Right-click the lower left corner of the screen, click [Run].
3. Execute regedit.exe to start up the registry editor.
4. Use the registry editor to specify the organization name and owner name in the registry values
under two keys described below.
• HKEY_LOCAL_MACHINE¥SOFTWARE¥Microsoft¥Windows NT¥CurrentVersion
• HKEY_LOCAL_MACHINE¥SOFTWARE¥Wow6432Node¥Microsoft¥Windows NT
¥CurrentVersion
Name: RegisteredOrganization
Type: REG_SZ
Data: Desired organization name
Name: RegisteredOwner
Type: REG_SZ
Data: Desired owner name
5. Exit the registry editor.
Setting the names has been completed.
54
Tips
In the Virtual Install Disk, the drivers used during the installation of Windows OS
are stored.
When Virtual Install Disk is installed by the manual option, it is automatically
enabled and automatically install the necessary drivers.
Express5800/R120h-1E, R120h-2E Maintenance Guide
5. Troubleshooting