NEC Express5800 Series Maintenance Manual page 142

Chapter 2 Useful Features
Delete all array configurations
Delete RIS on all physical drives
> Backup power source
Backup power status
Array Configuration
> Create Array
RAID Level
Logical Drive Label
Stripe Size /Full Stripe Size
Sector per track
Size
Unit Size
> Manage Array
List Logical Drives
-Logical Drive Details
-Delete Logical Drive
Create Logical Drive
Manage Spare Drives
-Assign Dedicated Spare
-Assign Auto Replace Spare
Delete Array
Disk Utilities
> Device Information
> Identify Device
Identification Duration (Seconds)
Start
Stop
Exit and launch Smart Storage
Administrator (SSA)
142
86400
Express5800/R120h-1E, R120h-2E Maintenance Guide
2. RAID System Configuration
Deletes all the array present in the controller
and the data present in the arrays will be lost.
Deletes RAID metadata on the drives which are not
part of array.
Select the RAID level based on the drives were be
chosen.
Alphabets and Numbers enter
The stripe size is the amount of data that is stored
on each physical drive in the array.
The number of sectors per track presented to the
operating system as part of legacy disk geometry
(C/H/S) information.
The value of logical volume.
Logical Drive Unit Size (MiB/GiB/TiB)
Shows the detail of logical unit.
Delete logical unit
Create another logical unit
Drives assigned as dedicated spares can only be
used as spare drives.
When drives assigned as auto replace, it will
automatically become part of the array.
Delete all array information and meta data
Provide the information related to the particular
device
Turn On/Off the device identification LED
Device LED identification Duration in seconds:
1-86400: input range. 86400:Default
Start to turn on the device identification LED
Stop to turn on the device identification LED
SSA doesn't support SWRAID under offline mode.
Use SSA under OS.