Table of Contents
Advertisement
Bluetooth
Q
Characters are broken if I receive a business
card in Korean or Chinese using the Bluetooth
Send a Business Card function.
A1 This may happen when you send a Korean or Chinese
business card by selecting the Select a business card
from the files (*.vcf, *.vcd) option in the Send a Business
Card menu. This is because the contents of the business
card file are not set to Korean or Chinese character set
(CHARSET). In this case, directly edit the contents of the
business card file as follows.
Right-click over the business card file to be sent
(*.vcf, *.vcd) and select Connect Program > Select
Program from the pop-up menu.
Select Notepad from the program list.
Edit the contents as follows.
Example) N:MagicSense => N;CHARSET=KS_C_
5601:MagicSense
For Korean, add CHARSET=KS_C_5601.
For Simplified Chinese (CHS), CHARSET=gb2312.
For Traditional Chinese (CHT), CHARSET=Big5.
A2 To avoid this problem, send a business card directly from
the address book of Microsoft Outlook or select the
Select an Outlook business card option in the Send a
Business Card menu and you can now normally send the
business card without editing the VCF file.
Q
I cannot find or connect the headset.
A1 If the headset is connected to another device and is
currently being used, you will not be able to locate it. In this
case, even if you locate the headset, you will not be able
to connect it. Disconnect the headset from the device and
then try again.
A2 If the headset is connected to the power adapter, the
Bluetooth wireless connection is not available. Disconnect
the headset from the power adapter and try again.
A3 A Bluetooth headset generally provides On/Off and Pairing
modes. To connect the headset to another Bluetooth
device such as a computer or cellphone, it must be in
Pairing mode. Switch the headset to Pairing mode and try
again.
In general, a Bluetooth headset in Pairing mode is
automatically switched to On/ Off mode after a pre-
determined period of time.
162
Advertisement
Table of Contents
