Q
How do I receive a fax while the system is in
power saving mode (Rest mode)?
A
To receive a fax in Standby mode, you have to
set it up as follows.
The automatic fax reception function of the fax
program needs to be activated. (For more information,
see the corresponding fax program manual.)
Click Start > Control Panel > Network and Internet
Connections.
Under See Also, click Phone and Modem Options.
In the Power Management tab of the Modem
Properties window, select the "With this device, exit
the computer from stand-by mode" item and then click
OK.
The above setting enables the modem to turn on
the system and receive a fax when in power saving
mode.
Wired LAN Related
Q
<Wake On LAN> function
A1 <Wake On LAN> is a function that activates the
system in rest mode when a signal (such as ping
or magic packet commands) arrives from network
(wired LAN).
To use <Wake On LAN> function:
Select My Network Places > View network
connections from the Desktop.
Click the right button on the touchpad over Local
Area Connection, and select Properties.
Click Configure, and select Power Management tab.
Select "Allow this device to bring the computer out of
standby", then click OK. Restart the system.
– When turning the computer off when the network is
connected without selecting the <Wake On LAN>
function, the LAN LED may not be turned off.
– The <Wake On LAN> function is only available
when the LAN is turned on.
– When connecting a wired LAN while using a
wireless LAN, the <Wake On LAN> function may
not work. To use the <Wake On LAN> function,
select "Do not use Wireless LAN."
– Connecting wired LAN while using wireless LAN
may not execute <Wake On LAN> function.
Configure wireless LAN to "Disable" to use <Wake
On LAN> function.
Click My Network Place> View network
connections on the Desktop.
Right-click over Wireless Network Connection and
select Disable.
154