Table of Contents
Advertisement
Upgrading Memory
One or more memory modules are installed on the computer.
There are memory slots and users can replace the installed memory or add new memory.
Before You Start!
Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the
■
computer is in Sleep mode.
Disconnect mains power and remove the battery before continuing.
■
To utilize the dual channel feature, using memory modules with the same specifications (of the same capacity and from the same
■
manufacturer) is recommended.
Only use the same type of memory as specified in the Product Specification.
■
Adding a Memory Module
1
Remove the screw on the memory compartment
cover at the bottom of the computer using a screw
driver.
Fixing Screw
2
Insert a new memory module into the memory slot at
an angle of approximately 30 degrees aligning it to
the angle of the memory slot.
132
Advertisement
Table of Contents
