Table of Contents
Advertisement
Questions and Answers
This section provides information on possible problems, solutions and other references for system use.
Windows Related
Q
The system does not shutdown properly.
A
When the system does not shutdown normally, press and
hold the Power button until the system manually shuts off.
If the Power-Saving Mode is configured into the Power
button, press and hold for more than 4 seconds to shut
the system off. When the system is turned on after such
manual shutdown, Scandisk will run to check errors in the
system.
Q
The system freezes during program operation.
A1 There is an error with the program currently being
used. Press the <Ctrl>, <Alt>, and <Delete> keys
simultaneously and click End Task in the Windows Task
Manager window.
A2 There is an error with the Windows OS. Reboot the system
by using the Power button.
Display Related
Q
The LCD screen is too dark or too bright
A
Turn on the LCD backlight or adjust the screen brightness.
Press Fn + (
+ (
), Fn + (
Q
The screen saver disturbs screen viewing during
Media Player or video file operation.
A
Click Tools > Options > Player and then clear the Allow
screen saver during playback in the Media Center
check box.
Q
In DOS mode, changing the full screen DOS
mode by pressing <ALT>+<Enter> key displays a
broken image for a short period.
A
The DOS mode which supports Byte characters such
as Korean and Japanese runs in graphic not in text mode.
In this case, a broken image may be displayed while
changing the video mode settings.
148
) to turn on the LCD backlight or press Fn
) to adjust the screen brightness.
Advertisement
Table of Contents
