Table of Contents
Advertisement
Q
In the following cases, the screen blinks or
displays noise for a short time (This only applies
to nVidia graphics card.): (Click the Graphics
Related tab, Change Resolution, Change Display
Device, Remove the AC Adapter, Restart the
System, Change PowerMizer level.)
A
This may happen while the video driver is examining the
connected device. While detecting, any connected display
devices may blink or some noise may occur.
Q
When I connect a projector, and change the
setting to display screen image on both the LCD
and the projector by pressing Fn + (
screen is not displayed properly.
A
Press Fn + (
) keys once again. If the same problem
continues, it means the projector cannot support the
resolution. Lower the resolution to 1024 x 768.
Q
The playback screen of a DVD title or an MPEG
file is only displayed on the LCD. (This only
applies to nVidia graphics card.)
A
Video is displayed on a single display device by default,
when LCD and CRT are selected simultaneously.
Right-click over the Desktop and select Properties
from the pop-up menu.
In the Display Properties window, select Settings
tab > Advanced > Ge-Force Go xxxx tab.
Select the Full Screen Video menu > Full Screen
Video Control item, set the full screen device to
"Auxiliary Display" and then click the Apply button.
Then you can view video on both the LCD and CRT
) keys,
display devices.
Q
The Taskbar on the bottom of the screen does
not appear when a projector is used as the
display device.
A
A This may happen, even though SXGA+ LCD supports
the 1400x1050 mode, the projector does not support that
mode. In this case change the resolution to 1024 x 768
(recommended) on your computer.
149
Advertisement
Table of Contents
