Toro LT2240 Installation Instructions Manual page 23

Product Overview
Controls
Seat Controls
Seat-Adjustment Lever
Move the seat-adjustment lever on the side of the
seat outward, slide the seat to the desired position,
and release the lever to lock the seat into position
(Figure 35).
1. Seat-adjustment lever
2. Armrest-adjustment knob
3. Weight and height
adjustment lever
Armrest-Adjustment Knob
Rotate the knob to adjust the armrest angle
35).
Seat-Back-Adjustment Lever
Move the lever to adjust the seat-back angle
35).
Weight and Height Gauge
The weight and height gauge indicates when the seat
is adjusted correctly (Figure
Figure 35
4. Weight and height gauge
5. Seat-back adjustment
lever
35).
Weight and Height Adjustment Lever
Use this lever to adjust to the proper weight of the
operator
the air pressure and push down to decrease the air
pressure. The proper adjustment is correct when the
weight and height gauge is in the green region.
Also use this lever to adjust the height of the seat.
Position the suspension anywhere within the green
region on the gauge to adjust the height.
g037412
(Figure
(Figure
23
(Figure 35). Pull up the lever to increase