Toro LT2240 Installation Instructions Manual page 22

Lowering the Operator's Platform
WARNING
Operating the machine with the platform
unlatched may cause you to lose control of
the machine, resulting in serious injury to you
and bystanders.
Never operate the machine without first
checking that the operator platform latching
mechanism is fully engaged and in good
working order.
1. Lower the platform carefully
Note:
The gas lift cylinder helps support the
platform.
Figure 32
2. As the platform nears the fully lowered position,
move the platform-latch handle
toward the front of the machine.
Note:
This ensures that the latch hooks clear
the locking bar.
Figure 33
1. Platform-latch handle
(Figure 32).
g290371
(Figure 33)
g290369
2. Locking bar
3. Fully lower the platform and move the
platform-latch handle toward the rear of the
machine until the latch hooks fully engage the
locking bar (Figure
1. Platform-latch handle
Checking the Operator's Seat
Switch
Check that the seat switch in the seat operates
correctly; refer to the Operator's Manual for your
machine.
22
34).
Figure 34
g290370