4.
Ensure that the control arm is supported sufficiently before removing.
5.
Remove the existing hex-head bolt (7/16 x 2 inches), 2 washers, seat belt, and spacer
Retain the hex-head bolt (7/16 x 2 inches), 2 washers, seat belt, and spacer for later installation.
1. Control-arm support
2. Hex-head bolt (7/16 x 2 inches)
6.
Remove the front control arm support plate from the seat.
Retain the front control arm support plate for later installation.
Figure 18
3. Washer
4. Washer
13
(Figure
5. Seat belt
6. Spacer
18).
g344019