Toro LT2240 Installation Instructions Manual page 2

1
Preparing to Install the Seat
Kit
No Parts Required
Preparing the Machine
1. Park the machine on a level surface.
2. Lower the cutting units.
3. Engage the parking brake.
4. Shut off the engine and remove the key.
5. Wait for all moving parts to stop.
6. Allow the engine to cool completely.
Raising the Operator's Platform
1. Move the platform-latch handle
toward the front of the machine until the latch
hooks clear the locking bar.
1. Platform-latch handle
2. Raise the platform
Note:
The gas lift cylinder assists lifting the
platform.
(Figure
Figure 1
(Figure 2).
1)
g290373
2
Figure 2
g290372