STANDARD ACCESSORIES
Blade tension device
Blade speed/motion detector
Inverter
This blade tension device equipped with hydraulic cylinder provides
appropriate tension to the saw blade.
To tighten the saw blade, turn the selector to
Upon saw blade breakage, the safety device will activate and
automatically stop all machine operation.
The limit switch of the safety device can be reset by turning the blade
tension selector to
To change the blade, turn the handle to
tension.
Besides detecting the blade speed, the speed/motion detector also
functions as a safety device.
The speed/motion detector protects operators and the machine by
preventing blade overloads and consequent damages if a saw blade
breaks or skids.
Once blade breakage or slippage is detected, the drive wheel will stop
in 10 seconds.
This inverter is installed under the workbed. It is used to control and
stabilize the saw blade speed during cutting.
To adjust blade speed, use the blade speed control knob on the
control panel.
Note:
1. Make sure the terminal points are connected.
2. Make sure the ambient temperature is within acceptable range and
keep the surroundings well ventilated.
3. Keep the inverter away from dust.
4. For repair or maintenance, please contact your local agent.
.
to release saw blade
.
4‐17