Standard Accessories - Sharp SW-130HT Instruction Manual

9. Power indicator lamp
When the lamp is on, it indicates the power to the machine is turned on.
10. Blade descend speed control knob

This knob is used to adjust the descend speed of the saw blade.

Turning the knob counterclockwise increases the blade descend speed.

Blade descend speed is a determining factor to a good cutting time and quality cutoff surface.

Also commonly known as the flow control valve

STANDARD ACCESSORIES

Blade tension device
Pointer
Wire brush
Gear reducer
 This blade tension device provides appropriate tension to the saw
Handle
blade.
 Turn the handle clockwise or counterclockwise to tighten or loosen
the blade tension.
Line
 Please check the blade tension with the tensiometer.
 The line should line up with the pointer after adjusting tension.
Never adjust blade tension while the blade is running.
The wire brush removes the metal chips on the saw blade teeth to so that
blade life can be extended.
Keep hands away from the brush while the wire brush is running
Turn off the hydraulic motor or the main power switch before performing
maintenance or cleaning on the wire brush drive system.
The specially designed gear reducer can work toward your preset blade
speed and torque.
Please refer to section 8 for information on maintenance.
4-7