Table of Contents
Advertisement
STANDARD ACCESSORIES
Blade tension device
Blade speed/motion detector
Blade
Speed/motion
detector
Inverter
4-18
This blade tension device equipped with hydraulic cylinder
provides appropriate tension to the saw blade.
To tighten the saw blade, turn the selector to
Upon saw blade breakage, the safety device will activate and
automatically stop all machine operation.
The limit switch of the safety device can be reset by turning the
blade tension selector to
To change the blade, turn the handle to
blade tension.
Never adjust blade tension while the blade is running.
Besides detecting the blade speed, the speed/motion detector
also functions as a safety device.
The speed/motion detector protects operators and the machine
by preventing blade overloads and consequent damages if a saw
blade breaks or skids.
Once blade breakage or slippage is detected, the drive wheel will
stop in 10 seconds.
This inverter is installed the machine base. It is used to control and
stabilize the saw blade speed during cutting.
To adjust blade speed, use the blade speed control knob on the
control panel.
Note:
1. Make sure the terminal points are connected.
2. Make sure the ambient temperature is within acceptable range and
keep the surroundings well ventilated.
3. Keep the inverter away from dust.
4. For repair or maintenance, please contact your local agent.
.
.
to release saw
Advertisement
Table of Contents
