Installing Fire Control Device; Relocating - Sharp SW-120NC Instruction Manual

Installing fire control device

Install a fire extinguisher or any other fire control device in the shop in case a fire breaks out.

RELOCATING

We recommend you follow these procedures when relocating or shipping your machine to other
place:
1. Descend the saw frame to its lowest position then turn off the power.
2. Fix the saw frame using the shipping bracket that originally came with the machine.
3. If you are shipping the machine, pack the machine carefully with industrial plastic wraps to
protect it from dust.
4. Use a crane or forklift to raise it. If a crane is used to lift the machine, ensure that the lifting
cable is properly attached to the machine.
5. Do not forget to include the equipments originally furnished including the shock absorption
steel plates and the instruction manual.
3-10