Factory Defined Settings - ABB Relion SAM600 Applications Manual

Section 9
Basic IED functions
IEC17000158 V1 EN-US
Figure 14: IED summary
However, the following information is available only on the product label:
• OrderingNo
• ProductionDate
This information is very helpful when interacting with ABB product support (for example
during repair and maintenance).
9.2.2

Factory defined settings

The factory defined settings are very useful for identifying a specific version and very helpful in
the case of maintenance, repair, interchanging IEDs between different Substation Automation
Systems and upgrading. The factory made settings can not be changed by the customer. They
can only be viewed. The settings are found in the local HMI under Main menu/Diagnostics/IED
status/Product identifiers
The following identifiers are available:
• ProductType
•
• ProductDef
•
• FirmwareVer
•
•
• ProductVer
•
68
Describes the type of IED. Example:
Describes the release number from the production. Example:
Describes the firmware version. Example:
Firmware version numbers run independently from the release production numbers.
For every release number there can be one or more firmware versions depending on
the small issues corrected in between releases.
Describes the product version. Example:
© Copyright 2017 ABB. All rights reserved
IEC17000158-1-en.vsdx
SAM600–IO
2.2.1.9
2.2.1
Switchgear control unit SAM600-IO
1MRK 511 445-UEN B
M11789-39 v11
2.2.1.0
Application manual