Setting Example; Comparator For Real Inputs - Realcomp; Identification - ABB Relion SAM600 Applications Manual

Section 4
Logic
EnaAbs : This setting is used to select the comparison type between signed and absolute
values.
Absolute : Comparison is performed on absolute values of input and reference values
•
Signed : Comparison is performed on signed values of input and reference values.
•
RefSource : This setting is used to select the reference source between input and setting for
comparison.
Input REF : The function will take reference value from input REF
•
Set Value : The function will take reference value from setting SetValue
•
SetValue : This setting is used to set the reference value for comparison when setting
RefSource is selected as SetValue .
4.13.4

Setting example

For absolute comparison between inputs:
Set the
Set the
Similarly for Signed comparison between inputs
Set the
Set the
For absolute comparison between input and setting
Set the
Set the
SetValue shall be set between -2000000000 to 2000000000
Similarly for signed comparison between input and setting
Set the
Set the
SetValue shall be set between -2000000000 to 2000000000
4.14

Comparator for real inputs - REALCOMP

4.14.1

Identification

Function description
Comparator for real inputs
40
EnaAbs = Absolute
RefSource = Input REF
EnaAbs = Signed
RefSource = Input REF
EnaAbs = Absolute
RefSource = Set Value
EnaAbs = Signed
RefSource = Set Value
© Copyright 2017 ABB. All rights reserved
IEC 61850 IEC 60617
identification identification
REALCOMP Real<=>
1MRK 511 445-UEN B
GUID-13302FD6-1585-42FE-BD6D-44F231982C59 v2
GUID-0D68E846-5A15-4C2C-91A2-F81A74034E81 v1
ANSI/IEEE C37.2
device number
Switchgear control unit SAM600-IO
Application manual