Mitsubishi Electric HS-U449 Service Manual page 41

2. Rotate the WORM WHEEL in Fig. 2-35-2 in the
direction shown by arrow A so that the GUIDE ARM
(TU) moves in the direction of arrow B and expose
the three screws (a) fastening the CAPSTAN
MOTOR.
3. Remove the three screws (a) fastening the
CAPSTAN MOTOR shown in Fig. 2-35-2 to remove
the CAPSTAN MOTOR.
(Installation)
1. Apply silicon compound (SC102) [859D164O10] to
the specified parts on the MAIN PLATE ASSY in Fig.
2-35-3.
2. Install the CAPSTAN MOTOR.
SILICON COMPOUND
(SC102)
MAIN PLATE ASSY
- 28 -
a
WORM WHEEL
GUIDE ARM (TU)
B
Arrow
CAPSTAN MOTOR
Fig. 2-35-2
Fig. 2-35-3
A