Mitsubishi Electric HS-U449 Service Manual page 26

2-17.PINCH ARM CAP, PINCH UNIT
DECK POSITION : Normal
(Removal)
1. Release the two catches (a) of the PINCH ARM CAP
shown in Fig. 2-17 to remove the PINCH ARM CAP.
2. Remove the PINCH UNIT shown in Fig. 2-17.
(Installation)
1. Insert Part A of the PINCH UNIT shown in Fig. 2-17
in the most external groove of the MAIN CAM.
2. Install the PINCH ARM CAP aligning Part B of the
PINCH ARM CAP with the rib of the MAIN PLATE
ASSY.
2-18.F/L PLATE, DOOR ARM
DECK POSITION : Normal
Remove the following parts before replacing the F/L
PLATE and DOOR ARM. Refer to the corresponding
items to install them.
• STAY PLATE (Item 2-2)
• BOTTOM ASSY (Item 2-3)
• SENSOR COVER (TU) (Item 2-10)
• MOTOR HOLDER (Item 2-16)
• PINCH ARM CAP (Item 2-17)
• PINCH UNIT (Item 2-17)
(Removal)
1. Slightly lift the back of the F/L PLATE (MAIN CAM
side) shown in Fig. 2-18-1 to remove the F/L PLATE.
2. Remove the DOOR ARM.
(Installation)
1. Apply grease (MULTEMP AC-DM)[859D055O90] to
the specified parts on the new F/L PLATE in Fig. 2-18-
1.
2. Apply grease (MOLYKOTE G PASTE) [859D055O50]
to the specified parts on the new F/L PLATE in Fig. 2-
18-1.
Part
MAIN CAM
ARM (TU)
MAIN PLATE
ASSY
GREASE
(MULTEMP AC-DM)
- 13 -
a
PINCH ARM
CAP
Part
A
PINCH UNIT
MAIN CAM
Fig. 2-17
GREASE
(MULTEMP AC-DM)
F/L PLATE
GREASE
(MOLYKOTE
G PASTE)
DOOR ARM
GREASE
(MOLYKOTE
G PASTE)
GREASE
(MULTEMP AC-DM)
Fig. 2-18-1
B
Rib
Back