Mitsubishi Electric HS-U449 Service Manual page 39

2-34.DRUM MOTOR STATOR, BRUSH
SPRING, SPACER, ROTOR CASE,
END RING, BRUSH, UPPER DRUM
ASSY
DECK POSITION : Normal
(Removal)
1. Disconnect the LEAD CONNECTOR of the DRUM
ASSY shown in Fig. 2-34-1.
2. Remove the two screws (a) fastening the DRUM
MOTOR STATOR shown in Fig. 2-34-1 to remove the
DRUM MOTOR STATOR.
3. Remove the two screws (b) fastening the ROTOR
CASE shown in Fig. 2-34-1 to remove the ROTOR
CASE.
Note : Mark the END RING and the UPPER DRUM
ASSY shown in Fig. 2-34-1 for ensuring correct
positioning in re-assembly.
4. Loosen the hexagon screw (c) fastening the END
RING shown in Fig. 2-34-1 to remove the END RING.
5. Remove the BRUSH SPRING shown in Fig. 2-34-1.
6. Remove the BRUSH shown in Fig. 2-34-1.
7. Remove the UPPER DRUM ASSY shown in Fig. 2-34-
1.
8. Remove the SPACER shown in Fig. 2-34-1.
Side View of END RING
This side down.
ROTOR CASE
END RING
UPPER
DRUM ASSY
Mark for ensuring
correct positioning
in re-assembly.
- 26 -
a
DRUM MOTOR
STATOR
LEAD
CONNECTOR
b
b
BRUSH
SPRING
BRUSH
c
SPACER
LOWER
DRUM ASSY
Fig. 2-34-1