Huawei CX600-8 Hardware Description page 85

HUAWEI CX600-8/16/X3/X8/X16 Metro Service Platform
Hardware Description
Slot number: On the CX600-X8, the slots of LPUs are numbered from 1 to 8. The slot number increases from
left to right facing the front panel of the CX600 (there are corresponding marks on the panel).
Card number: The cards of LPUs are numbered from top to bottom and from right to left beginning with 0. If
there is no card on a board, the card number is set to 0.
Port number: The ports of LPUs are numbered from left to right and from top to bottom beginning with 0.
Table 4-1
Table 4-1 Board distribution in the board cage of the CX600-X8
Slot
Number
1 to 8
9 to 10
11
4.1.3 CX600-X8 Specification
This section describes the system configuration and physical parameters of the CX600-X8.
Chassis Specification
Table 4-2
Table 4-2 Physical parameters of the CX600-X8
Item
Dimensions (H x W x D)
Installation position
Weight
Typical power consumption
Issue 03 (2013-11-30)
NOTE
describes the slot layout on the CX600-X8.
Quant Slot Width
ity
8 41 mm (1.6 inches)
2 36 mm (1.4 inches)
1 36 mm (1.4 inches)
lists the physical parameters of the CX600-X8.
Empty
chassis
Full
configuratio
n (maximal)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Remarks
These slots are used to hold LPUs.
These slots hold SRUs in 1:1 backup mode.
The slot is used to hold an SFU, which,
together with two switch fabric units on the
SRUs, works in 2+1 load balancing mode.
Description
620 mm x 442 mm x 650 mm (24.41 in. x 17.40 in. x 25.59
in.) (chassis main body dimensions)
620 mm x 442 mm x 770 mm (24.41 in. x 17.40 in. x 30.31
in.) (chassis dimensions including the chassis's front and rear
assembly and cable racks)
N68E cabinet or a standard 19-inch cabinet
43.2kg (95.27 lb)
136kg (299.88 lb)
4100W
4 CX600-X8
66