Huawei CX600-8 Hardware Description page 114

HUAWEI CX600-8/16/X3/X8/X16 Metro Service Platform
Hardware Description
The SFUI-200-C can be used only on the CX600-X8.
The SFUI-200-C can be used only together with the 200G Switch and Route Processing Unit A5.
Technical Specifications
Table 4-12
Table 4-12 Technical specifications of the SFUI-200-C
Item
Silkscreen
of the
board
name
Power
consumpti
on (typical
value)
Heat
dissipation
Board
weight
Dimensio
ns (H x W
x D)
Lowest
Software
Version
4.4.3 100Gbps Switch Fabric Unit D(SFUI-100-D)
Appearance
100Gbps Switch Fabric Unit D(SFUI-100-D) is the new generation switch board. It supports
100G full duplex capacity per slot. The Switch Fabric Unit D(SFUI-100-D) switches data for
the entire system at line speed of 1.18 Tbit/s. This ensures a non-blocked switching network.
The CX600-X8 has three SFUs working in 2+1 load balancing mode. The entire system provides
a switching capacity at line speed of 3.54 Tbit/s.
The three SFUs load balance services at the same time. When one SFU is faulty or being replaced,
the other two SFUs automatically take over its tasks to ensure normal delivery of services.
Figure 4-18
Issue 03 (2013-11-30)
NOTE
lists the technical specifications of the SFUI-200-C.
Specifications
SFUI-200-C
77 W
249.82 BTU/hour
3.82 kg (8.42 lb)
41 mm x 399 mm x 551 mm (1.61 in. x 15.71 in. x 21.69 in.)
V600R003C00
shows the appearance of the Switch Fabric Unit D(SFUI-100-D).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 CX600-X8
95