Maintenance; Maintenance Safety; Recommended Maintenance Schedule(S) - Toro Groundsmaster 3505-D Operator's Manual

Maintenance

Note:
Determine the left and right sides of the
machine from the normal operating position.
Note:
Download a free copy of the electrical or
hydraulic schematic by visiting www.Toro.com and
searching for your machine from the Manuals link on
the home page.

Maintenance Safety

•
Before you leave the operator's position, do the
following:
– Park the machine on a level surface.
– Disengage the power takeoff and lower the
attachments.
– Engage the parking brake.
– Shut off the engine and remove the key (if
equipped).
– Wait for all movement to stop.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first hour
After the first 10 hours
After the first 50 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 400 hours
Maintenance Procedure
• Torque the wheel-lug nuts.
• Torque the wheel-lug nuts.
• Check the condition and tension of all belts.
• Change the engine oil and engine-oil filter.
• Check the safety-interlock system.
• Check the engine-oil level.
• Drain the water separator.
• Check the tire pressure.
• Check the engine-coolant level.
• Clean debris off the radiator and oil cooler (clean them more frequently in dirty
conditions).
• Check the hydraulic-fluid level.
• Check the hydraulic lines and hoses for leaks, kinked lines, loose mounting supports,
wear, loose fittings, weather deterioration, and chemical deterioration.
• Check the blade stopping time.
• Clean the machine.
• Clean and maintain the seatbelt.
• Check the electrolyte level. (If the machine is in storage, check it every 30 days.)
• Lubricate all of the bearings and bushings.
• Remove the air-cleaner cover and clean out the debris. Do not remove the filter.
• Check the condition and tension of all belts.
• Change the engine oil and engine-oil filter.
• Service the air-cleaner filter. (More frequently in extreme dusty or dirty conditions)
• Torque the wheel-lug nuts.
• Check the parking-brake adjustment.
• Replace the fuel filter.
•
Allow machine components to cool before
performing maintenance.
•
If the cutting units are in the transport position, use
the positive mechanical lock (if equipped) before
you leave the machine unattended.
•
If possible, do not perform maintenance while the
engine is running. Keep away from moving parts.
•
Support the machine with jack stands whenever
you work under the machine.
•
Carefully release pressure from components with
stored energy.
•
Keep all parts of the machine in good working
condition and all hardware tightened, especially
blade-attachment hardware.
•
Replace all worn or damaged decals.
•
To ensure safe, optimal performance of the
machine, use only genuine Toro replacement
parts. Replacement parts made by other
manufacturers could be dangerous, and such use
could void the product warranty.
34