Positioning The Seat; Unlatching The Seat; Pushing The Machine By Hand - Toro 74412 Operator's Manual

Figure 20
1. Anti-scalp roller
2. Spacer
3. Bushing
Figure 21
1. Anti-scalp roller
2. Bushing

Positioning the Seat

The seat can move forward and backward.
Position the seat where you have the best control
of the machine and are most comfortable.
Important: To adjust, move the lever
sideways to unlock seat (Figure 22).
Slide the seat to the desired position and release
lever to lock in position.
4. Flange Nut
5. Bolt
3. Flange Nut
4. Bolt
Figure 22
1. Adjustment lever

Unlatching the Seat

Push the seat latch rearward to unlatch the seat.
This will allow access to the machine under the
seat (Figure 23).
Figure 23
1. Seat latch
2. Fuel cap
Pushing the Machine by
Hand
Important: Always push the machine
by hand. Never tow the machine because
hydraulic damage may occur.
Pushing the Machine
1. Disengage the power take off (PTO) and
turn the ignition key to off. Move the levers
to neutral locked position and apply parking
brake. Remove the key.
2. Rotate the by-pass valves counterclockwise
1 turn to push. This allows hydraulic fluid to
21
3. Seat