Table of Contents
Advertisement
components
a
i
j
b
cd
e
f
g
h
Item
Inside cover
Protective cover for the main body.
a
Illumination Sensor
Detects incoming light to control the IR LED.
b
Lens
Lens for the camera.
c
IR LED
These infrared LED's are controlled by the illumination sensor.
d
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
If you reset the camera, the network settings will be adjusted so that DHCP can be
Reset Button
J
e
enabled. If there is no DHCP server in the network, you must run the IP Installer
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
ARM-IN
Alarm I/O Port
ARM-OUT
f
GND
Microphone hole
Microphone is embedded.
g
Power Port
Port for power terminal block.
h
Micro SD Memory Card
Compartment for the Micro SD memory card.
i
Compartment
Network Port
Used to connect the PoE or Ethernet cable for network connection.
j
Description
Used to connect the alarm input sensor or external day/night sensor.
Used to connect the alarm output signal.
These are common ports to connect alarm input/output signals.
English _9
Hide quick links:
Advertisement
Table of Contents
