Buttons Used In Ip Installer; Static Ip Setup - Samsung QND-6010R User Manual

ButtonS uSeD in ip inStaLLer

a b c
Item
Model name of the connected camera.
Device Name
Click the column to sort the list by model name.
a
However, search will be stopped if clicked during the search.
Alias
This function is not currently implemented.
b
Displays either <Static>, <Dynamic> or <PPPoE> for the current network connection
Mode
c
status.
Ethernet address for the connected camera.
MAC(Ethernet) Address
Click the column to sort the list by Ethernet address.
d
However, search will be stopped if clicked during the search.
IP address.
IP Address
Click the column to sort the list by IP address.
e
However, search will be stopped if clicked during the search.
Network setting for the camera.
Protocol
The factory default is "IPv4".
f
Cameras with the IPv6 setting will be displayed "IPv6".
DDNS URL address enabling access from the external Internet.
URL However, this will be replaced with the <IP Address> of the camera if DDNS registration
g
has failed.
IPv4
Scans for cameras with the IPv4 setting.
h
d e f g
j k l m
h i
Description
Item
Scans for cameras with the IPv6 setting.
IPv6
i
Activated in an IPv6 compliant environment only.
Scans for cameras that are currently connected to the network.
Search
j
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
Auto Set
The IP Installer automatically configures the network settings.
k
Manual Set
You should configure the network settings manually.
l
Exit
Exits the IP Installer program.
m
For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download
`
M
the latest version from the Hanwha Techwin web site.

Static ip Setup

manual network Setup
Run <ip installer_v2.XX.exe> to display the camera search list.
At the initial startup, both [auto Set] and [manual Set] will be grayed out.
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.
`
M
1. Select a camera in the search list.
Check the MAC address of the camera on the camera's label.
Both the [auto Set] and [manual Set] buttons will be
activated.
2. Click [manual Set].
The Manual Setting dialog appears.
<ip address>, <Subnet mask>, <Gateway>, <Http
port>, and <vnp port> of the camera are displayed in the
preset values.
3. In the <address> pane, provide the necessary information.
• MAC (Ethernet) Address : The MAC address imprinted on
the camera label is automatically displayed and requires no
user setting.
IP related parameters can be set only when DHCP is not checked.
`
M
Description
English _25