Table of Contents
Advertisement
user
1. From the Setup menu, select the <Basic (
2. Click <user>.
3. Provide the necessary user information.
• Administrator password change : Change the password
for the administrator.
For the security purposes, you are recommended to use a
`
J
combination of numbers, alphabets uppercase and lowercase
and special characters for your password.
It is recommended to change your password once every three
`
months.
The password length and limits are shown as follows.
`
-
A combination of at least three types of upper case, lower
case, numeric, and special characters: 8 to 9 characters.
-
A combination of at least two types of upper case, lower case,
numeric, and special characters: 10 to 15 characters.
-
Should be different from the ID.
-
Cannot repeat the same letter, number of special characters more than 4 times.
-
Don't use 4 or more characters consecutive together. (examples : 1234, abcd)
-
Don't use 4 or more characters repeated. (examples : !!!!, 1111, aaaa)
-
Special characters that are allowed. : ~`!@#$%^*()_-+=|{}[].?/
-
After the factory setting, the admin and user passwords are initialized. You need to reset the password.
-
When you access the camera web page for the first time or access it after the initialization, you will be moved to the
admin password setting menu.
-
In this menu, you need to login again with the new password before using the camera web page menus.
-
If the existing password is not matched, when you change the admin password, you cannot change the password.
-
After changing your password, if there is a camera connected to a CMS or NVR client, then you need to re-register it
with the newly changed password. If the camera is still connected with the same password, then the account may be
locked because a client uses the previous password.
If you try to login with the registered account, 5 or more consecutive password authentication has failed, and then the
`
account may be locked for thirty seconds.
When the password is changed while multiple connections are active from a PC, the browser may malfunction. In that
`
case, reconnect to the server.
• Guest setup : If you select <enable guest access>, the guest account can access the Web viewer
screen but can only view the live Viewer screen.
The ID/password for the guest account is <guest/guest>, which cannot be changed.
`
• Authentication setup : If you select <enable rtSp connection without authentication>, you can
access RTSP without logging in and view the video.
)> tab.
• Current users : If you select <use>, you can set or change the user permissions.
The manager can set up audio input and alarm output.
`
Audio input/Alarm output : You can enable/disable Audio input/Alarm output in the live mode on the current user account.
`
Profile : If you select <Default>, you can only see the default profile video; if selecting <All>, you can see the full profile
`
videos.
ONVIF functions available to a registered user allowed to use ONVIF functions are limited to those of granted with permission.
`
J
4. When done, click [apply (
)].
Date & time
1. From the Setup menu, select the <Basic (
2. Click <Date & time>.
3. Specify the time and date that will be applied to the camera.
• Current system time : Displays the current time settings of
your system.
• Timezone : Specify the local time zone based on the GMT.
• Use daylight saving time : If checked, the time will be set
one hour before the local time zone for the specified time
period.
This option will be displayed only in areas where DST is
applied.
• System time setup : Specify the time and date that will be
applied to your system.
- Manual : Sets the current time of the camera manually.
When you select the <Synchronize with pc viewer> check box, the time of the webviewer is set to
the time displayed on the PC that runs the webviewer.
- Synchronize with NTP server : Sync with the time of the specified server address.
4. When done, click [apply (
)].
If you select the <Synchronize with PC viewer>, the standard timezone should be set the same as the current timezone in
`
J
PC.
)> tab.
English _41
Hide quick links:
Advertisement
Table of Contents
