Samsung QND-6010R User Manual page 42

setup screen
ip & port
1. From the Setup menu, select the <Basic (
2. Click <ip & port>.
3. Click <ip address>.
4. Set the <ipv4 setup>.
• IP type : Select an IP connection type.
- Manual : Specify the IP address, Subnet mask,
Gateway, DNS1, and DNS2.
- DHCP : Specify the DNS1 and DNS2.
- PPPoE : Specify the DNS1, DNS2, ID and Password.
If you set it to <Manual>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.
`
• MAC address : Shows the MAC address.
• IP address : Displays the current IP address.
• Subnet mask : Displays the <Subnet mask> for the set IP.
• Gateway : Displays the <Gateway> for the set IP.
• DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
5. Set the <ipv6 setup>.
Set to <Use> to use IPv6 address.
`
• Default : Use the default IPv6 address.
• DHCP : Display and use the IPv6 address obtained from the DHCP server.
• Manual : Enter IP address and gateway manually and use it.
The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous settings will be restored
`
J
automatically.
Once completed with editing, click [Apply (
`
with the changed IP.
42_ setup screen
)> tab.
)] to apply changes and the browser exits. After a while, connect again
6. Click <port>.
7. Type in each item in the Port menu as necessary.
Neither the port range between 0 and 1023 nor port 3702 is available.
`
• HTTP : HTTP port used to access the camera via the web
browser.
The default is 80(TCP).
Setting the HTTP port for Safari and Google Chrome browsers to 65535 is not allowed by security policy.
`
• HTTPS : In this version, the security of the web communication protocol HTTP is strengthened. It can
be used when you set HTTPS mode in SSL.
The initial value is set to 443(TCP).
The available setting range is 1024~65535. (For security reasons, in your Safari or Google Chrome browser, you may not use
`
65535 as your HTTPS port.)
• RTSP : Used to transfer videos in the RTSP mode; the default is 554.
• Use timeout : When connecting to RTSP, this function resets the connection if there's no response for a
certain time.
• Device port : Set a port used to transfer video signals with the Hanwha Techwin protocols.
If changed the HTTP port, the browser exits.
`
M
Afterwards, address should contain the newly assigned HTTP port trailing the IP.
ex) IP address: 192.168.1.100, HTTP port : Assigned 8080  http://192.168.1.100:8080
(If HTTP port is set to 80, no need to specify the port number)
Using RTSP and HTTPS is recommended in order to prevent the image information from being restored.
`
8. When done, click [apply ( )].
event setup
You can easily set the event detection items, and move to the detailed setting.
1. From the Setup menu, select the <Basic (
2. Click <event setup>.
3. Activate desired items on the Event list.
4. When done, click [apply ( )].
To configure detailed event settings, click a desired type. You will be
`
M
redirected to the detailed settings.
)> tab.