Samsung SCP-3371/SCP-3371H User Manual page 84

troubleshooting
Problem
"Auto Refresh(Wait)" appears
and the camera reboots.
"Please Check Heater System"
appears.
Check the Power cord's by periods
The Power cord's coating has
been damaged.
The power cord is hot to touch
when the product is in operation.
The power cord gets hot after
being folded or pulled on.
84_ troubleshooting
Cause and Solution
► Such symptoms may occur if the camera's temperature increases from
-10º or lower to -10º or higher to prevent the malfunction of motor.
► The heater may malfunction. Turn off the camera and call where you
bought.
Continuing to use the product when its power cord is damaged constitutes an
electrical and fire hazard. The power plug must be removed from the outlet
immediately, and a qualified service personnel or your system provider should be
contacted for assistance.
Page
7
7
-