Samsung SCP-3371/SCP-3371H User Manual page 40

connection & installation
❖
Notes for Waterproofing
This product is an indoor unit. If it is installed outdoors, use the outdoor housing to make it
waterproof.

Installing the unit on the wall by combining the outdoor housing and wall mount
1.
Install the wall mount on the vertical wall.
If the mount is installed on an inclined
wall, moisture can penetrate inside
the outdoor housing through the
external cable.
2.
Wrap the screw part of the housing
with a sufficient amount of Teflon tape
for assembly.
3.
When separating the dome cover
and fastening it to the housing frame,
make sure that the gasket is not
loosened to separate from the dome
cover.
4.
Install the wall mount adapter for
waterproofing, and apply the silicon
sealant between and around the wall
and wall mount for sealing.
J

Take particular caution to ensure that there is proper sealing if the installed side is not fl at.
40_ connection & installation
Silicon sealant
Wall mount
Screw unit
Concrete wall
Teflon tape
Dome gasket