How To Set Up Protocols And Id Dip Switches - Samsung SCP-3371/SCP-3371H User Manual

HOW TO SET UP PROTOCOLS AND ID DIP SWITCHES

You can control various settings of the camera system using the Communication and ID DIP switches.
Before installing the product, please set up the DIP switches according to the installation environment.
1. Remove the install base from the camera body and place the part to be headed to the lower end as
shown in the fi gure.
2. Set the switches according to your installation environment. For more detailed setup information, please refer
to the chart on the next page.
3. The camera may malfunction if the switches are not fully turned On/Off; please double check the switches
before fi nishing setup.
Communication Protocol
DIP Switch(SW2)
Camera ID DIP Switch(SW1)
English - 17