PREPARING ADAPTER AND CABLES
Power Adapter
Power adapter has the capacity of AC24V 2.5A.
<Camera Wiring Interface Board>
M
After connecting the power cable by separating the power connector from the terminal, make the connection between
terminal and connector by using a bolt.
Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below :
If the distance between the camera and the monitor exceeds the recommended maximum, please use
an auxiliary video amp.
M
If the camera is controlled through coaxial communication, please use a video amp intended for coaxial communications.
Regular video amps do not transfer coaxial signals.
Communications Cable
For the camera to communicate with the controller, a
RS-485/422 communications line is required. To ensure the
quality of long distance communication and the accuracy of the
overall communication it is recommended using a twisted pair
cable such as UTP.
M
Depending on the camera's environment, the communications distance may vary.
Neither the video nor communications cable is enclosed with the camera.
Distance
300m
450m
600m
Recommended Cable
Specification
4C2V(RG-59/U)
5C2V(RG-6/U)
7C2V(RG-11/U)
English - 29