Samsung SCP-3371/SCP-3371H User Manual page 77

P(Priority) :
Set the priority of Alarm Inputs. If more than one alarm is simultaneously activated,
the alarm with the highest priority activates before the others.
SEQ. :
Enables setting up a sequence action for the camera in response to an alarm.
You can configure the settings of: HOME/PRESET/SWING/GROUP/TOUR/TRACE/A.PAN/OFF
Alarm/AUX Output
Setting 1, 2, 3 :
Enables selecting an Alarm Output method.
- DETECT MODE : Displays the alarm input ports (1~8) and the
motion detection input. If you set MD Input,
you can select one from: OFF/MD.
- AUX MODE : Both Alarm OUT/AUX OUT 1 and 2 are NC/NO
while Alarm OUT/AUX OUT 3 performs NO only.
Timer 1, 2, 3 :
- On : Retains an alarm output for a set duration from a
minimum of 1 second to a maximum of 60 minutes upon
the alarm occurrence.
- MOMENT : The output operation will last until an alarm/AUX event
is released since its occurrence.
- The Alarm/AUX output system is equipped with a relay circuit,
whose output port operates as below: (based on "NO")
Alarm Out OFF
OUT Off 1, 2, 3 :
- Output of an alarm/AUX event can be forcibly terminated
when it occurred.
Alarm Out ON
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Alarm Setting
Alarm Enable
Alarm Input
Alarm/AUX Output
MD Dwell Time
ALM Dwell Time
Alarm/AUX Output
Setting 1 DETECT MODE
Setting 2 DETECT MODE
Setting 3 DETECT MODE
Timer 1 OFF
Timer 2 OFF
Timer 3 OFF
Out Off 1
Out Off 2
Out Off 3
English - 77
OFF
OFF
HOLD