Samsung SCP-3371/SCP-3371H User Manual page 36

connection & installation
Setting Up Camera DIP Switches
DIP switches for communication and ID protocols are located on the bottom of the install base.
For the switch settings, refer to the dip switch settings of this manual.
Protocol(SW2)
Connecting Camera Safety Cable and Attaching Camera
Carefully attach the camera to the mount following the alignment guide marks as shown in the picture.
First hook the camera's safety cable on the mount, and then attach the camera.
Safety Cable
Safety Cable Hook
✽ To attach the camera to the mount, refer to the alignment guide marks as shown in the picture.
M

Make sure to fi rst hook the camera's safety cable to the mount before proceeding. Otherwise you may be exposed to serious
injury caused by a fallen camera.
36_ connection & installation
ID(SW1)
Alignment
Directions
Alignment
Direction Guides
Alignment
Direction Guides