Water Sensor - Huawei FusionModule500 Manual

FusionModule500 Smart Mini Data Center
Product Description (ECC800e)
Indicator
Alarm
Networking Switch
Table 3-41 Networking switch description
Name
Button pressing
Button holding
down

3.4.8 Water Sensor

A water sensor detects water on the floor in real time and generates an alarm when water is
detected.
Issue 01 (2017-04-20)
Color Silk
Screen
Red ALM

If an indicator blinks at long intervals, it is blinking on for 1s and then off for 1s.
 If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s and then off
for 0.05s.
Definition
Press the button for less
than 5 seconds.
Hold down the button
for more than 5
seconds.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status Description
intervals
Blinking at The networking succeeds.
long intervals
Off The BIM is not faulty.

Steady on The BIM is faulty.
 Communication with the CIM
times out.
 No network is connected. (The
BIM is waiting to connect to a
network.)
Blinking at  Network parameters are being
cleared.
super short
intervals
 The BIM is blinking.
Function
Searches for and joins a network if there is no
network. Initializes the network parameters if
there is a network.
Clears the current network and resets the
wireless module; disconnect the network.
3 System Architecture
57