Xilinx Spartan-6 FPGA SP605 Embedded Kit Getting Started page 24

Installation and Licensing of ISE Design Suite 12.1
6.
Note:
docking stations might find there are three Ethernet HostIDs to choose from. If you select a docking
station HostID, then you will only have a license when you are docked. It is best to avoid the HostID
of your RJ45 Ethernet connection on Laptop computers, as some Ethernet adapters will power down
when not plugged into the network. If you do select an Ethernet adapter, it is best to select your
wireless card.
X-Ref Target - Figure 17
24
Follow the instructions to generate the license by providing your Host OS information
and Host ID (Disk Serial number or Ethernet MAC address) as shown in
click Next.
Laptop users may want to select their Disk ID or Wireless Ethernet card HostID. Laptops on
Figure 17: Selecting Your Host ID
www.xilinx.com
Figure 17 and
UG727_21_113009
SP605 Getting Started Guide
UG727 (v1.1) June 21, 2010