Utility-System Maintenance - Panasonic KX-TVM50 Programming Manual

1.
Click Utility in the menu bar.
2.
Select System Trace.
(You can click the icon in the tool bar instead of step 1 and 2.)
3.
Check the data you wish to log.
4.
Check the ports for which you wish to log data.
5.
Click ....
The Save dialogue box appears.
6.
Navigate to the folder where to wish to save the System Trace file.
7.
Click Save.
8.
Click OK.
1.8.6 Utility—System Maintenance
The System Administrator can maintain the VPS using System Maintenance.
Follow the steps below for System Maintenance:
1.
Click Utility in the menu bar.
2.
Select System Maintenance.
3.
Edit parameters in the System Maintenance dialogue box.
4.
Click OK.
System Maintenance Start Time
Specifies the System Maintenance start time.
Value Range
HH:MM (HH: Hour, MM: Minute)
HDD Auto Stand-by Mode
Specifies whether to enable or disable HDD Auto Stand-by Mode.
Value Range
Disable, Enable
HDD Auto Stand-by Delay Time
Specifies the length of time that the VPS must wait before activating HDD Auto Stand-by Mode. If the
time period expires without the access to HDD, the VPS will function HDD Auto Stand-by Mode.
Value Range
0 min–21 min, 30 min–60 min
1.8 Utility
Programming Guide 27