Panasonic KX-TVM50 Programming Manual page 126

2.5 System Parameters
Value Range
1–100 msgs
Feature Guide References
2.4.12 External Message Delivery Service
System External Message Delivery Duration Time
Specifies the maximum telephone connect time allowed for an External Message Delivery call to
prevent excessive telephone charges. Time begins counting when the destination number answers
the call. The VPS terminates the call when it exceeds the specified length of time. However, the VPS
does not terminate a call until the entire message is played even though the specified time expires.
Value Range
1 min–9 min
Feature Guide References
2.4.12 External Message Delivery Service
Company Telephone No.
Specifies the company's telephone number. When the recipient has failed to retrieve the sender's
message because of he or she did not enter the correct password, the VPS announces the
company's telephone number to the caller. The caller can later call the company for assistance or to
speak to the message sender.
Value Range
Max. 32 digits
Intercom Paging Parameters
VPS Intercom Paging functions in conjunction with the Intercom Paging feature of the PBX. It allows
the VPS to page the called party (announce the caller's name, line number, etc.) while the caller is
placed on hold. To utilise this feature, Intercom Paging must be available for the PBX, and the VPS
must be properly programmed. This feature is available for DPT Integration mode only.
Intercom Paging Sequence
Specifies the intercom paging sequence required by the PBX. This can be programmed using a
combination of the 7 letters and 12 dial codes.
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
126 Programming Guide
, # and special codes