Panasonic KX-TVM50 Programming Manual page 115

;: Dial Pause (default 3 s)
X: Extension Dialling
1–9, 0, , #: Dial Code
Feature Guide References
2.3.1 Alternate Extension Group
Reconnect Sequence on Busy
Specifies the sequence for reconnecting to the caller if the called extension is busy.
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause (default 1 s)
;: Dial Pause (default 3 s)
X: Extension Dialling
1–9, 0, , #: Dial Code
Reconnect Sequence on No Answer
Specifies the sequence for reconnecting to the caller if the called extension does not answer.
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause (default 1 s)
;: Dial Pause (default 3 s)
X: Extension Dialling
1–9, 0, , #: Dial Code
Reconnect Sequence on Refuse Call
Specifies the sequence for retrieving a call placed on hold after the extension (in Call Screening
mode) has refused to accept it.
Value Range
Max. 16 digits consisting of 0–9,
, # and special codes
, # and special codes
, # and special codes
2.5 System Parameters
Programming Guide 115