Panasonic KX-TVM50 Programming Manual page 135

Value Range
Analyse: the VPS monitors the status of the Trunk, recognises that the destination party goes off-
hook, and connects the line.
Guidance: the VPS plays the following guidance before connecting the line to the destination party:
"You have a call. To answer the call, press 1. Otherwise, press 2 and hang up." If the destination party
presses "1", he or she will be able to answer the transferred CO call. The VPS continues playing this
guidance for the time specified in "Outgoing Call No Answer Time" in "Dialling Parameters". If the
transferred party does not answer the call within this time, the VPS considers it as a No Answer call.
Feature Guide References
2.3.6 Call Transfer to Outside
Ignore Received First DTMF
If set to "Enable", the VPS ignores the first digit of DTMF from PBX when transferring a call to outside
phone.
Value Range
Disable, Enable
Trunk Group
Specifies the parameters for each Trunk Group No.
Follows the steps below to edit the Trunk Group:
1.
Click Click to edit....
2.
Select the desired Trunk Group No. (1–64).
3.
Edit each parameter in the Trunk Group dialogue box.
4.
Click OK.
EFA Transfer
Specifies whether or not the VPS uses EFA (External Feature Access) when transferring a incoming
CO calls to a trunk. If set to "Enable", the VPS transfers a incoming CO calls to a trunk according to
"EFA Transfer Sequence" specified in "Transfer to Outside". This parameter is available with DPT
Integration only. If set to "Disable", the VPS transfers a incoming CO calls to a trunk according to "Call
Transfer to Outside Sequence" specified in "Transfer to Outside".
Value Range
Disable, Enable
Caller ID Callback
Specifies whether or not the VPS allows a subscriber to call back the party who left a message in his
or her mailbox by using the caller ID information sent from the PBX. This setting applies to the trunk
number used when the message with Caller ID information was left in his or her mailbox.
2.5 System Parameters
Programming Guide 135