Management Interfaces - Huawei OptiX OSN 8800 Hardware Description

OptiX OSN 8800/6800/3800
Hardware Description
Board
PIU
TN16UXCM/TN1
6XCH/TN16SCC

4.4.3 Management Interfaces

The OptiX OSN 8800 T16 subrack provides various communication and maintenance
interfaces for the management and maintenance purposes, as shown in
Table 4-28 Management interfaces
Bo Front Panel
ard
TN
16E EFI
a
FI
Issue 01 (2016-03-10)
Slots for Active and Standby Boards
TN96EOW can be housed only in a master subrack.
When slot IU22 houses a TN96EOW board, only one AUX board is required
and is inserted in slot IU21. AUX spare boards need to be available at a site
with only one AUX board so that the AUX board can be replaced immediately
once it is faulty. In a subrack without a TN96EOW board, two AUX boards
must be configured.
IU20 & IU23
IU9 & IU10
Interface
Con Pinou
Name
nect t
or
Typ
e
NM_ETH RJ4 Table
1/NM_ET 5 4-29
H2/ETH1/
Table
ETH2/ET
4-30
H3:
network
manageme
nt
interfaces
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 OptiX OSN 8800 Subrack
Description
NM_ETH1-NM_ETH2:
Connects the network

interface on the
equipment through a
network cable to that on
an NM server so that
the NM can manage the
equipment.
Connects the

NM_ETH1/NM_ETH2
network interface on
one NE through a
network cable to that on
another NE to achieve
communication between
NEs.
ETH1-ETH3:
Connects a network

cable from the
ETH1/ETH2/ETH3
interface on one subrack
to corresponding
interfaces on the other
subracks to achieve the
Table 4-28.
Specification
Dimensions

of front
panel (H x
W x D): 80
mm (3.1
in.) x 76.2
mm (3.0
in.) x 220
mm (8.7
in.)
Weight: 0.5

kg (1.1 lb.)
Power

consumptio
n:
Typical
power
consumptio
n: 2 W
Maximum
power
consumptio
b
n : 2.5 W
47