Table of Contents
Advertisement
GB
Control panel:
Switching on for the first time
Insert the plug in mains socket to switch on.
The display lights will light on.
The fridge compartment temperature is pre-set
to 4°C but can be set changed to desired value
by user.
The freezer compartment temperature is pre-
set to -18°C but can be set changed to desired
value by user.
Do not load the compartments with food
immediately.
The display shows fridge compartment inside
(actual) temperature up to 19°C.
The display shows freezer compartment inside
(actual) temperature.
The appliance incorporates a protection in
electronics, therefore the appliance may not
start immediately – wait for about 6 minutes.
When it starts, you will then hear the compressor
and refrigerant gas flow (You may also
hear some cracking / popping sounds
which is normal)
The set temperature will not be reached for
approximately 8 hours and display may fluctuate
during this period this is not a fault. When the
correct storage temperatures reached have
been reached for each compartment, you can
start loading food.
The high freezer temperature warning indicator
light (!) will be activated after 24 hours of
operation.
Functions of control panel:
a) Fridge compartment set and OFF button,
b) Freezer compartment set and OFF button,
c) Quick fridge button,
d) Quick freeze button,
e) Fridge compartment actual temperature,
f)
Freezer compartment actual temperature,
g) Fridge compartment set temperature bar
graph lights,
h) Freezer compartment set temperature bar
graph lights,
i)
Fridge compartment OFF light,
j)
Freezer compartment OFF light,
k) Economy light
l)
Quick fridge light
m) Quick freeze light
n) High temperature indication light
Temperature display and adjustment
Fridge and freezer compartments can be
adjusted separately by the electronic display
set buttons.
a) Fridge
The fridge temperature display shows fridge
compartment average temperature.
To change the fridge compartment set
temperature press the fridge set button..
Each time this button is pressed the following
numbers will be displayed by the order on the
display: 4, 2, 8, 6, 4, ...
The new set temperature will flash for 3 seconds
and then it will revert to actual fridge temperature
Bar graphs above the fridge actual temperature
display shows the set temperature of the fridge
compartment. It changes from min to max point
for each set temperatures.
OFF function: When the fridge compartment
is empty you can stop cooling of the fridge
compartment. To select the fridge off function,
press the fridge set button to 3-5 seconds
continuously. To cancel the off function press
the set button one more time and select desired
set value by pressing consecutive times to set
button.
b) Freezer
The freezer temperature display shows freezer
compartment average temperature.
To change the freezer compartment set
temperature press the freezer set button..
Each time this button is pressed the following
numbers will be displayed by the order on the
display: -18, -20, -22, -24, -18 ...
The new set temperature will flash for 3 seconds
and then it will rewerd to actual freezer
temperature
Bar graphs above the freezer actual temperature
display shows the set temperature of the freezer
compartment. It changes from min to max point
for each set temperatures.
OFF function: When the freezer compartment
is empty you can stop cooling of the freezer
compartment. To select the freezer off function,
press the freezer set button to 3-5 seconds
continuously. To cancel the off function press
the set button one more time and select desired
set value by pressing consecutive times to set
button.
4
Instructions for use
Hide quick links:
Advertisement
Table of Contents
