Operating The Product; Control Panel; Defrosting - Blomberg SST4455VI Operating Instructions Manual

Full-integrated fridge
Table of Contents

Advertisement

5

Operating the product

Control Panel

1. On / Off Indicator
Press the On / Off button for 3 seconds
to turn off or turn on the fridge. When
the fridge is off, the symbol ( ) is lit. All
the other symbols are turned off.
2. Fridge temperature setting button
Press this button ( ) to set the
temperature of the fridge to 8, 7, 6, 5,
4, 3, 2, 8... respectively. Press this
button to set the fridge temperature to
the desired value.
3. Quick fridge function
The button ( ) has two functions. To
activate or deactivate the Quick cool
function, press it briefly. Quick Cool
indicator will turn off and the product
return to its normal settings.
Use the Quick cooling function
when you want to quickly cool the
food placed in the fridge. If you
want to cool large amounts of fresh
food, activate this function before
putting the food into the product.
If you do not cancel it, Quick cooling
will cancel itself automatically after 1
hour at the most or when the fridge
reaches the required temperature.
This function is not recalled when
power restores after a power failure.
4. Alarm Off
When the fridge door is opened for 1
minute a sound alarm turns on. Alarm
can be turned off by pressing "Alarm
Off" ( ) button. If you close the door
and then open again, "Door open
alarm" will be activated again after 1
minute later. In case of sensor failure,
the warning icon will lit ( ). If the
button „Alarm off" is pressed, the
warning will be "cleaned".
1
2
11
3
5
5. Vacation Function
In order to activate vacation function,
press this button (
the vacation mode indicator (
activated. When the vacation function is
activated, "- -" is displayed on the fridge
temperature indicator and no active
cooling is performed in the fridge. It is not
suitable to keep the food in the fridge in
this function. To cancel this function press
Vacation function button again.

Defrosting

The appliance defrosts automatically.
The defrosting water runs to the drain tube via a
collection container at the back of the appliance
(1) (see diagram). During defrosting water
droplets may form at the back of the fridge where
concealed evaporator is located. Some droplets
may remain on the liner and refreeze when
defrosting is completed. Do not use pointed or
sharp edged objects such as knives, forks to
remove the droplets which have frozen. If at any
time the defrost water does not drain from the
collection channel, check to ensure that no food
particles have blocked the drain tube. The drain
tube can be cleared by pushing the special
plastic plunger provided down the drain tube (2).
Please flush with approximately 100ml of warm
tap water, to ensure that the water drains. If the
blockage is still present, use a suitable
"refrigerator drain cleaning tool", and flush
with approximately 100ml of warm tap water.
NOTE: Do not flush with excessive water,
this will cause the evaporator tray at the back
of the appliance to overflow and cause a leak.
If the problem persists please contact service.
EN
4
) for 3 seconds, and
) will be

Advertisement

Table of Contents
loading

Table of Contents